Over the weekend I installed my body kit i have the front blitz and sides and rear are drift. Well the blitz doesn't have turn signal spots on the bumper so i took the bulbs out of the harnesses and zip tied them to the body of the car well when i went out last night it was showing that my turn signals were on the whole time ( not blinking ). Now my turn signal bulbs look like they are dieing. So what did everyone else do with the stock bumper turn signals when they put on a body kit.
And thanks in advance
well its kinda hard to find a place for the stock lights to mount anywhere without fabricating the front bumper to accomidate them. All I did was cut the old light out and wired them up to a set of projector foglights, I then custom molded them in the front opening of the bumper. They worked fine seeing that the lights stay on all the time and then they blink when you hit the turn signal. figured i would give you an idea to work off of seeing that is what alot of people including myself have done.
hondas are like tampons.....every pu$$y needs one...
mildly built 99' ln2, eagle h-beam rods, wiseco forged alum. pistons, cusco oil catch, t3/t4 super 60 garret, tial 40 mm wastegate, hp tuners, prothane mount inserts, 2.5" exhaust.
Not a cavy but here is where i put the turn signals on my sunfire with blitz
there are also turn signals you can wire up that look like the TRD fender signal from any auto parts store.
that's what i did to my sunfire when i put the blitz kit on
http://www.myspace.com/fpsunfire
5 seconds to find another street...
Thanks guys I have a few ideas now.
wickedfire- how did you get those signals mounted? i plan onm something similar, but cant figure it out.
I'll eventually take the time to put something here. I swear.
