Ok, my first question is, I did the mod for both hi beam and low beam to burn at the same time, and now, when I first start the car, the drl's flicker on and off for about 5 seconds, then the light in the dash clicks on and off, but the lights do not. It only happens some times. I soldered everyhting together, so I know it isn't a wiring issue. i am just wondering if anyone else has had this same problem? My next ? is, is there something I can use to clean my turn lamps on my bumper? I have the clear ones, and they have an "orange tint" to them from the years of abuse. I dont want to buy new lenses, because that is pricey. I have a 98 cavalier z24. Thanks for any replies!
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
you need to disable your DRL's
also, check and make sure you dont have a bulb out.
the lenses you MIGHT be able to use plastic X or products similar for headlight fogginf. check your local oarts store.
thanks, I'll give it a shot, and if buffing it out doesnt work, then I will pay the 40 for the new ones.
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
Actually the link I posted was for a set...
hmmm.... That is pretty darn cheap! I think I will save myself the agony of wet sanding and buy those. Thanks for the link!
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
