i search already the topics but i couldnt find a good answer...

i got pwr m3 style mirrors but my car doesnt posses pwr mirrors(manual mirrors)
i just want to no how i can i wire them??
my mirrors have tree wire 1blue 1red 1green and i dont have any wirring diagram for them.

thanks for your help!



!pıɐן ʇǝƃ oʇ pǝǝu noʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-_-_-_-JCO EastSiderZ-_-_-_-

well, one will be your ground, and a wire for up/down, and a wire for left/right. your best bet would be to go to a junkyard and get a switch from a car that already had pwr mirrors, and wire them to it, as it is a unique switch that works with polarity, such as pwr locks and pwr windows.



Did I mention I drive a 2000 Lumina now?-----wigm-tuners.org member

i dont need to hook it in the fuse block???
i can get a whatever constant 12+ to power the switch right?
and ground it on the metal part of the car



!pıɐן ʇǝƃ oʇ pǝǝu noʎ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
-_-_-_-JCO EastSiderZ-_-_-_-

yea as long as you get a 12 volt constant, you can run the wire anywhere you want. ground is the same, any bare metal on the car. (if its a painted surface, scrape or sand the paint cuz it wont make a connection otherwise)



Did I mention I drive a 2000 Lumina now?-----wigm-tuners.org member