xenon bulbs factory wiring???? - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
xenon bulbs factory wiring????
Thursday, January 01, 2009 4:22 PM
if i buy xenon bulbs ca and plug them into the factory wiring will they work or will i have to get a hid conversion kit.i don't want any burnt wires or anything.i just like the bluish lights.but if it is to costly i can live without them




Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 4:28 PM
Real HID kits are a whole set you buy and rewire, not just bulbs.
You can get blueish tinted bulbs off ebay but you will sacrifice light output.
Search next time there is a lot of threads on here with pictures and stuff too.



Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 4:31 PM
The lights on my car are just xenon gas filed bulbs off ebay. But I also have 2 bulbs in each assembly instead of 1 and a parking light.



Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 4:33 PM
i just wanted to know if the xenon filled ones on ebay will hurt the stock wiring like improper hid kits



Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 4:46 PM
No, they will not. If it's an HID conversion kit, you will need to rewire. just bulbs off ebay, plug them right in. It will not ruin anything as they work just like the stocks do.



Did I mention I drive a 2000 Lumina now?-----wigm-tuners.org member
Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 5:20 PM
thanks guys i didn't want to learn the bad way



Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 5:38 PM
Don't get any bulb over 55watts.

And be careful driving at night as you wont be abel to see.. blue and purple bulb fetigue the eyes.



" Aint nothin' but a Peanut!"
Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 7:44 PM
Anyone know what i can do to upgrade my stock headlights for my 03 cavi? Thaey dont make angeleyes for the 3rd gens.Does anyone know how to take the headlights apart??
Re: xenon bulbs factory wiring????
Thursday, January 01, 2009 9:46 PM
Oven and butter knife.
You can replace the amber parking light thingy with fog lights like I did.








I don't have the sheet metal on there anymore. I fixed the glue spots that showed underneath those like the day after I took these pics.



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search