removing cf b-piller covers - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
removing cf b-piller covers
Tuesday, March 24, 2009 3:17 PM
Hey, i have the carbon fiber b-piller covers that are two way taped on to my b-pillers and i may want to remove them and add them to a cavalier if i get it; has anyone ever removed a set after they were on there for awhile?,;i dont want to ruin them taking them off, but i would want them on my cav if i get it....
I AM thinking heat them up and pull them off, maby need new two waty tape? they are stuck on pretty good as they just survived a cold snowy salty winter here...
any help would be aweosme
Thanks





98 j-body sedan





Re: removing cf b-piller covers
Tuesday, March 24, 2009 3:26 PM
if you get the new cav, just pop em off using the 3 or so screws that hold them in place.

sedan to sedan should be a direct swap




Re: removing cf b-piller covers
Tuesday, March 24, 2009 5:58 PM
jnickel wrote:if you get the new cav, just pop em off using the 3 or so screws that hold them in place.

sedan to sedan should be a direct swap

Yep. I just swapped a set over from my 99 coupe to my 03 coupe. Just roll down the window, pull the rubber back, and you should see the screws that hold them in. Be really careful because the tabs break easily.






Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search