Hey guys, driving an 05 cavalier sedan,
I'm thinking about buying some angel eyes and putting them into the signal light slot to compliment the no cut projector kit I'm getting for my headlights.
What would be the best way to get them to stay put in the signal light slot?
tabs that attatch to the back side of the black shroud
i made little L tabs and epoxyd them parallel on the back side of the shroud, with the mounting tabs visible on either side of the hole when looking at it straight on as if it were on the car. i just built 2 more sets of 03+ lights quad projectors and angel eyes. ill get some build pics up soon
Wicked, that sounds great, I'm looking forward to the build pics.
Thanks again!
where did you get the no cut projectors from because i am wanting to do the same?
2010 Lonestar Bash 2nd place J-Body Street Class
You have a couple options:
1) Talk to John Benham on this site
2) Search 9007 projectors on eBay
3) retro-solutions.com
Pretty much all come form the same place.... although the second option is the most effective, it is also the most risky.
On eBay I have managed to find the ones that they sell on retro-solutions.com, which are the ones that have the 7 color led back color changing.
$150 as opposed to $250.
Angels eyes are included in the set and are built into the projectors.
Hey guys, I'm looking at a few ccfl rings on ebay right now... the smallest I can find is 8cm.
I measured to the best of my ability without taking the clear lens off, as I need to drive my car tomorrow.
Anyone know if 8cm is a suitable size for the signal light slot? Or for that matter how big the ccfl rings were that w00tburgers had on his car?
Trey Reed wrote:where did you get the no cut projectors from because i am wanting to do the same?
x2
Buddy Club Ecotec Cavalier
* More to come *
lol sorry I'm blind
Here's a stupid question... how do you get the clear front cover off the headlights?
Buddy Club Ecotec Cavalier
* More to come *
heat up the blak glue and slowly pull it apart or you can you a very sharp blade and cut the glue
2010 Lonestar Bash 2nd place J-Body Street Class
to those driving an 03+
DO NOT get the large projectors, or the ones on ebay.
They are too big to fit in the headlight.
I managed to make them fit by bending the lens with a heat gun, but that was more of a PITA than it was worth. Plus there's also slight blistering on my lens now. FACK.
