Hey guys I'm looking for a wider stance on the cav. Does anyone have pictures and a general good size for them? I'm trying to eliminate the extra bit of room in the rear wells. Basically im looking to get the tires flush with the body. I'm thinking between 15mm and 25mm, if anyone has pics please post. Thanks again.
iv been told most folks use a half inch..
Check it 1/2 spacer. but it will depend on your offset. best way to know for sure is to actually get in there and measure it.
here is what mine looks with half inch spacers on 95-99 z24 wheels
without them
with the 1/2" spacer
thanks guys does anyone have any pics from the rear at about ten feet or so? Just looking for a car with a nice stance to compare to.
yeah i as well have spaced out my wheels, i actually did a staggard setup by putting 1in. in the front and 2in. in the back so i have all four wheels in a wider stance, a inch wider in back overall.
Straight lines are over-rated In My Opinion =]
spacers? what spacers... lol
Mmmm id like to see more pics of the vert.
im sure there's enough out there lol
Azn, what wheels are on that vert? i love concaved wheels....are yours just a huge offset to make up for the gap versus an adapter?
04 Cav. 2dr. 5spd. My DD. 'Nuff said.
Neither. Those were 18x10 all around.
what tires were you running? and what wheels are they?
im currently on 225/40/18's...would those tires fit an 18x10 wheel?
04 Cav. 2dr. 5spd. My DD. 'Nuff said.
Thanks for the help guys!
best picture i have right now, but there 1/2" hub spacers with 3/8" wheel spacers
All those spacers in back? And your wheels still look sunk? You need a lower offset set of wheels.
1.5" spacers, wheels were +38 offset
StatiCav (AznCav) wrote:All those spacers in back? And your wheels still look sunk? You need a lower offset set of wheels.
well thats with the car up in the air and the wheel only hand tight, as i said, best pic i have lol, i should get one soon, its not as sunk as it looks
1.5" spacers on LS sport wheels
DOPER.
