I have read over the archive three from trd-901 but still have an issue.
I have the relay but don't have the switch. I plan to use the factory controls for the mirror adjustments. I want to have a momentary switch for opening and the door locks for closing.

there are 11 wires on the relay, 4 wires goes to each mirror leaving 3 wires left.The wires are yellow, orange, and black.

Black is obviously ground, I assume orange is constant and yellow is switched for open close using diodes.

I hooked it up this way and got the mirrors to close but can't get them to open. i saw the mirrors work before i bought them so i know they work.

anyone have them hooked up this way or have any input on how to wire them up.


"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"

Ive got a wiring diagram I can send you...

ill try and do it later today

That would be great.

thank you.


"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"

could you post or send me that diagram?

Here is what I was sent.




"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"