Alright, so I realize I have no ground wires in my 1998 chevy cavalier. I have two wires for the parking lights and turn signals and two wires for the high beam and two for the low beam. I know which wires I'd like to connect to but, as for grounding the wires....how do I go about that?

FIrst of all, this should be in the exterior or audio and electronics forum (most wiring questions go there)

Second, you can always ground by simply running the ground wire to a bolt that goes to the body or engine. The main ground for the engine is right there on the drivers side at the front of the engine & transmission. Get yourself a loop connector if you don't already have one, crimp it on, and bolt it down.

Much obliged. Still pretty new to the forum so general just seemed to fit