MSD - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
MSD
Saturday, August 27, 2005 4:41 PM
is there an MSD coil for a 2.0 sunbird



C:\Documents and Settings\HP_Owner\My Docum

Re: MSD
Wednesday, August 31, 2005 9:07 AM
i'm pretty sure. I know there's one for the 2.0 n/a turbo



hot rod, street mod, whatever, just passion

Re: MSD
Wednesday, August 31, 2005 11:04 AM
whats the part #? do you know?


C:\Documents and Settings\HP_Owner\My Docum
Re: MSD
Wednesday, August 31, 2005 1:36 PM
hmmm... can't really say. I never had the MSD coil, just seen it on this one guys' 2.0 turbo bird. he had an entire MSD ignition set-up.


haven't talked to the guy in over a year otherwise I'd tell you how to get a hold of 'em. sorry if that's a bubble buster. I guess the only other thing to do would be to contact MSD or search to find out for sure.



hot rod, street mod, whatever, just passion

Re: MSD
Wednesday, August 31, 2005 7:28 PM
http://www.v6z24.com/registry/sylverbird <------Car


http://www.customstreetdesigns.com/1906-6420.htm<---------MSD Setup used




JVC KD-SX8350, Powerbass 6x9's rear, have to find some decent 4" front speakers,
Two Solobarics 12L5 powered by a Legacy LA2070 (1200x2 max).
Soundstorm F100.4 powering the interior speakers.
Now it's time for engine work.
Re: MSD
Wednesday, August 31, 2005 10:19 PM
does your motor have a distributor??? if so, use an msd gm dual plug coil. its a direct replacment. if you want to go nuts, you can use that coil and an msd 6a or 6al box, but if you use the box, you can also use an msd blaster coil instead of the stock replacment 2 plug coil.

if you have coilpacks, use the gm 2 tower coil. you will need 2 of them. you also could use an msd dis 2 with that.



Re: MSD
Thursday, September 01, 2005 7:12 AM
yes alont, I know where his regestry is, but his email is nonresponsive. thanks for finding the set up tho.



hot rod, street mod, whatever, just passion

Re: MSD
Thursday, September 01, 2005 12:27 PM
ok it not got a distriuter. so if I go with the 2 tower coil how would I go about hooking it up


C:\Documents and Settings\HP_Owner\My Docum
Re: MSD
Thursday, September 01, 2005 3:55 PM
There should be instructions provided.
Re: MSD
Thursday, September 01, 2005 6:28 PM
basicly, you unbolt the coils and bolt the new ones on. no modding required.





Re: MSD
Thursday, September 01, 2005 8:32 PM
ok I have the 2.0 it has 1 4 post coil


C:\Documents and Settings\HP_Owner\My Docum

Re: MSD
Thursday, September 01, 2005 10:09 PM
no it has 2 2 post coils bolted to one plate (the ignition module). you need to get 2 msd 2 tower coils for your motor.



Re: MSD
Friday, September 02, 2005 8:31 AM
ok gotcha


C:\Documents and Settings\HP_Owner\My Docum
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search