is there an MSD coil for a 2.0 sunbird
C:\Documents and Settings\HP_Owner\My Docum
whats the part #? do you know?
C:\Documents and Settings\HP_Owner\My Docum
does your motor have a distributor??? if so, use an msd gm dual plug coil. its a direct replacment. if you want to go nuts, you can use that coil and an msd 6a or 6al box, but if you use the box, you can also use an msd blaster coil instead of the stock replacment 2 plug coil.
if you have coilpacks, use the gm 2 tower coil. you will need 2 of them. you also could use an msd dis 2 with that.
ok it not got a distriuter. so if I go with the 2 tower coil how would I go about hooking it up
C:\Documents and Settings\HP_Owner\My Docum
There should be instructions provided.
basicly, you unbolt the coils and bolt the new ones on. no modding required.
ok I have the 2.0 it has 1 4 post coil
C:\Documents and Settings\HP_Owner\My Docum
no it has 2 2 post coils bolted to one plate (the ignition module). you need to get 2 msd 2 tower coils for your motor.
ok gotcha
C:\Documents and Settings\HP_Owner\My Docum