got my car back and now its time to work... - Second Generation Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
got my car back and now its time to work...
Tuesday, June 26, 2007 4:58 PM
my key is stuck in the ignition... i dont have my haynes handy... what could be the problem?




Re: got my car back and now its time to work...
Thursday, June 28, 2007 3:56 PM
lock cyl and key not cheep if your manuel mine was like 150+



Re: got my car back and now its time to work...
Thursday, June 28, 2007 4:01 PM
Run the shifter back and forth to make sure it is in park, and turn the wheel back and forth some to see if it will release.
Re: got my car back and now its time to work...
Thursday, June 28, 2007 8:06 PM
it has been like this for a while... i know i dont have to shimmy the wheel... and what i think is it may be the switch to let it know its in park but i dunno if it could be anything else... and i dont havr the dealer manual i have the 15 dollar haynes manual...



Re: got my car back and now its time to work...
Tuesday, July 10, 2007 2:03 PM
Same thing happened to my 91 Sunbird after some red neck kid assended me at a stoplight. Finally got it out when I jammed the shifter hard into low, came right out after I parked it . Hope this helps.
Re: got my car back and now its time to work...
Tuesday, July 10, 2007 7:58 PM
i had the same damn problem, and literally same car lol, sunbird convertible 91, ha same color to but ya i had to replace the lock cylinder, it was like 15 bucks or so at advance auto, just a bitch to do it, fyi make sure u get the cylinder to lock back in when u replace it if not it will slide out...ha i made that noob mistake




Re: got my car back and now its time to work...
Sunday, July 15, 2007 3:15 PM
good to know... i also have to replace a blinker return spring... yippee... cant waut for the dealer repair manual to come in... 4.99 on ebay!



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search