I have the Eibach Sway bars front and rear. The instaliation kit came with a set of longer bolts with long spaces and shorter ones with short spacers. Directions from what I've read don't tell which ones go where! Help!

This pic should answer it:

<a href="http://www.wildweasel.ca/j-body/HowTo/images/EibachRearSwayBar/right_endlink.jpg"><img src="http://www.wildweasel.ca/j-body/HowTo/images/EibachRearSwayBar/right_endlink_t.jpg"></a>

I'm not really sure what you're talking about though. I would have thought it was plainly obvious which bolt goes where.

Unless there's some hardware from the front bar you've got mixed in there or something.

The longer ones probably go to the back and the shorter ones go to the front.

Thing is both can go on the front and/or the rear. I had the short ones on first and it seemed really tight when cornering, then I switced the longer ones in the back and now rear end feels really lose now..Grr.. I'm confused.

i think the short go in front cause on my g/fs cav i think her kit had long for both ends


and when you turn sharp the cv hits the bar cause it sit up to high