3 Bolt Camber Plate by GroundControl - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 1:09 PM
Click here for a picture...

It's a three bolt design, seems like it will work. I don't see why not. Anyone try it?



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)

Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 2:04 PM
Looks pretty cool! I'm more interested in the bearing and spring perch setup than the adjustability.





Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 2:33 PM
It may just work for 3rd gens, but not for me, unless I drill three new holes in the tower.




Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 5:54 PM
I am with Weasel. I would rather have a front pillowball setup than a camber plate. I sent Tein an email, but no answer

I see that the 3 bolts are slotted, so it may work. My only question is do you have to cut away some of the strut tower to get full adjustment??






Jason
99 Z24
#25 to register on JBO!!
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance
Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 6:12 PM
Looks like you would have to slot your strut towers (assuming the 3 holes even lined up) to get the caster adjustable. You should have pleanty of room in the middle for adjustment of camber though.

Strut diameter is 14MM, but I'm not sure if they would be considered short or long. An email to ground control would be your best bet.



Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 6:14 PM


Sexy




SPD RCR Z - '02 Z24 420whp
SLO GOAT - '04 GTO 305whp
W41 BOI - '78 Buick Opel Isuzu W41 Swap

Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 6:32 PM
yeah definitely sexy.



Vice President - NEJBody
2007 Cobalt SS
2001 Sunfire (retired)
Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 7:13 PM
Looks really good, but that item doesn't match j-body front strut towers. I think.


___________________________
MAKING MY DREAMS A REALITY
Visit my cardomain site !!!

ELIOT. Now.....boosted.

Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 8:03 PM
Looks different. Just wish that they would make J specific ones. That would solve that problem.


I'll have a sig someday....................
Nissan for sale drop me a line!
Re: 3 Bolt Camber Plate by GroundControl
Monday, October 24, 2005 8:07 PM
Blackcav00 wrote:Looks different. Just wish that they would make J specific ones. That would solve that problem.


Not enought demand. Contact mcmoney if you want camber plates.



Re: 3 Bolt Camber Plate by GroundControl
Wednesday, October 26, 2005 3:30 PM
That design is alot better and smaller than their first 4 bolt design. You had to cut away most of the strut tower to make adjustments

I hope it is not $299 each




Jason
99 Z24
#25 to register on JBO!!
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance

Re: 3 Bolt Camber Plate by GroundControl
Wednesday, October 26, 2005 8:59 PM
Yes, you would have to cut away some of the strut tower for full adjustment. As you can see, the adjustment holes are offset from the mount hole. (forgive me for lack of better terms) Luckily, I don't have that issue with my Stillen ones




__________________________________________________________________
Performance cars do not win car shows and show cars do not win races.
It's up to you to decide which you'd rather win.


Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search