m45 idler bracket - Boost Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
Does anyone have one for sale? I have a 2001 z24 and have everything but this bracket. Has anyone made one. I am considering that too since thats all thats holding me back. Maybe even some dimensions, pulley size...etc...thanks
I do not think anyone makes them. I was thinking about coping it, and reselling some, but I never got around to it.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
mike ill send you mine if you would like to copy it. hell ill send the pcv baffle, too.... all id ask is a discount on them for future purchase!!!!
RIP silver car. You will be missed.
i would like the original sc pcv baffle!
Make reproductions of them both Mike!
Brad, I can copy both if you want to ship them out to me.
Not sure why my subscription to this thread never emailed me...
Edited 1 time(s). Last edited Tuesday, February 04, 2014 7:03 AM
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
please Brad!!!!!
i probably could if brad isnt going to, my kit is not in use.
I've got one for sale if you really need it badly.
It's $6k.
I'll leave it to you to strip off the other bits that are attached to it.
I hope to have Brads in my hand soon to copy.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
please design it differently than OEM did. straight an fittings are a bitch.
RIP silver car. You will be missed.
They do make 90 degree an fittings....wouldn't that clear the charger?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Yes, as long as it does not stick out more then two/one and a half inches.
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
Taetsch Z-24 wrote:Yes, as long as it does not stick out more then two/one and a half inches.
shouldn't be an issue at all.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
The issue with the plate on mine now is it only has the barbs on it, but it works.
In three-four months when I am putting my 2.4 in I could get pictures for you if you wanted.
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
no way those would fit... i have a picture of how close it is somewhere....
RIP silver car. You will be missed.
more something like this maybe?
this is not the pic i wanted to show but i cannot seem to locate the damn thing... anyways, the blower squeezed the two hoses nearly shut right there where they came off the fitting.
RIP silver car. You will be missed.
Magik1109 wrote:more something like this maybe?
NPT to AN should work, but would require a thicker plate for mounting.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
....damn twin cams. Quad4 Is what I should have stuck with. junk fwd cars.
/rant
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
Did anyone make a copy as I am in need of one right now?
I drew one up. Ended up being not worth my time to get any made. Everyone I talked to about manufacturing it wanted $300-400. I did't go any further than that.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Forum Post / Reply
You must log in before you can post or reply to messages.
