Hey i am getting Rota 17.5 inch subzero wheels with my cav dropped on sportlines and the only offsets they offer are 42mm and 45mm which one should i get?

by what the faq says it should be 40mm, but 42mm will work. (almost positive about this.)


i'm baaaaack!!

Alright then, They say you can get it with 45mm or 48mm.. Do you thing that the 45mm will be alright or not????

it should be no problem at all. there was a guy on here runnin 49mm and had no problems at all. but i would stick to the 45mm rather than the 48's.


i'm baaaaack!!

.kURt. wrote:it should be no problem at all. there was a guy on here runnin 49mm and had no problems at all. but i would stick to the 45mm rather than the 48's.

yea but it all depends on your suspension. not everyone can run a 49mm offset. im still not sure of your question. first you say they come is 42 and 45. then you say they come in 45 or 48. which one is it? if you can get the 42

The 17x7" SubZero's come in a 45 and 48mm only. The 48mm offset version is a 5x100 bolt pattern, but with a Subaru hub center ( smaller than the Jbody ). I am using the 45mm offset and hubcentric ring and had no problems except for having to roll the rear fenders some




Jason
99 Z24
#25 to register on the Org !!
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance

They actually make them with the Subaru hub size??

If so, then you can't use that one so you've only got one option. That really seems strange through. They'd really be limiting their market by not using an aftermarket hub size made to use adapters.