where can i get clear ac knobs
rip the coating of rubber off your existing knobs that works
Ryan
Ryan Frank wrote:rip the coating of rubber off your existing knobs that works
Yes this should work.
If you dont want to do this to yours, either
A-Go to a junkyard and get some to have an extra set
B- Buy a set on ebay
Yeah you can do all 3 in like 10min's or less.
It is easy to do. Even easier if you use a hair drier to heat up the rubber coating then peel it away.
^^^^ what they said, peel rubber off of yours, don't buy them, huge waste of money when you can do it to the ones you already have
Click Here for PIX!!
yes what he said,^ definately don't buy them, its soooooooo easy!
i didn't use a hairdryer.. i turned the heat on in the car and stuck them in the vents. ready in couple minutes.
<img src="http://www.j-body.org/registry/tabitha/personal_pic.jpg">
Click here to rate my car
i'll sell you mine
__________________--------------------------____________________
Team: NONE RIGHT NOW
Sponsored By: Pro Trucks
Work Being Done By: creative customs
Stuff for Sell:
Any of u guys have a picture of the finish work, i would appreciate it.
97 Chevy Cavalier
2.2L 3 spd
Automatic
i was gona say... "you have them already"... um theres a page on my cardomain with a how to. Take a look at the sig
-----------------------------------------------------
98' Pontiac Sunfire SE
oh and i dont have it in the how to, but i do recomend the hair dryer after doing mine without
-----------------------------------------------------
98' Pontiac Sunfire SE
dragoncrester wrote:Any of u guys have a picture of the finish work, i would appreciate it.
here is a pic of mine also you dont need to heat them it just makes it a little easier but you can just pull the rubber off , it makes no difference (trust me ive done mine that way and about 4 of my friends the same way
Sinister Ambitions
when your girl is getting on your last nerve f*#k her dont fight her
I know I'll be one of the few that says don't do it. I myself think it makes them look cheap.
Man i remember when this first became popular. I thought the clear knobs were one of the coolest things ever. Wow, just wow.
I was really taking this of my shifter and the car is dirty but you can see the knobs lol
do you have to take the dash apart to do this...or can you just heat them up while everything is together, and then pull the rubber off?
Under Construction
so you just pull the knobs off you dont have to unscrew them or anything
pull
-----------------------------------------------------
98' Pontiac Sunfire SE
as with almost everything in the interior, when in doubt just pull. eventually it'll come off
rofl mdk, nice 1.
its very easy, i did mine in 8 minutes during rush hour a month ago
I took mine on at a stop light a few weeks back... real easy... took like 2 min...
very true
