Well after critizin the @!#$ outta me i practiced preping my car for paint and did my best(hey im still new and you get what u pay for) theres a few spots that need to be razor bladed and weather striping that needs to be black again. but untill tommorw heres the teaser pic....



http://www.cardomain.com/ride/3364129

Marbelizer?

waiting on more pics to decide.... i do like how the top looks..... but we shall see

yes marble for my first overall its angled 2 tone starts in dog leg and goes below first door handle and above second one then as u can wraps around. will have more pics up tommorw when i can get them shot=)


http://www.cardomain.com/ride/3364129

TheSundownFire (GME Chat) wrote:Marbelizer?

if u ment what i used, plastic wrap.


http://www.cardomain.com/ride/3364129

why didnt they take the windows out?



180hp in 1989 or 145hp in 2002, you decide. >

Ill have to see it all done, that line follows not one line of the car from what I can see.










~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

DIY FTW

Need to see more before I can really decide.


I <3 JGM
I think bigfoot is blurry,
that's the problem. It's not the photographer's fault. Bigfoot is blurry. And that's extra
scary to me. There's a large, out-of-focus monster, roaming the countryside.
"Run! He's fuzzy!" "Get outta here!"

In Loving Memory of Phil Martin December 14 2005

fexican wrote:

TheSundownFire (GME Chat) wrote:Marbelizer?

if u ment what i used, plastic wrap.

No marbelizer is a paint additive. Its what JO3Y had in the Cav's paint IIRC.

TheSundownFire (GME Chat) wrote:

fexican wrote:

TheSundownFire (GME Chat) wrote:Marbelizer?

if u ment what i used, plastic wrap.

No marbelizer is a paint additive. Its what JO3Y had in the Cav's paint IIRC.

He didn't use marbelizer. He sprayed black, sprayed red, layed plastic wrap down on it, then pulled it off. It pulls some of the red off.

-Seth

wizkiddrummer wrote:

TheSundownFire (GME Chat) wrote:

fexican wrote:

TheSundownFire (GME Chat) wrote:Marbelizer?

if u ment what i used, plastic wrap.

No marbelizer is a paint additive. Its what JO3Y had in the Cav's paint IIRC.

He didn't use marbelizer. He sprayed black, sprayed red, layed plastic wrap down on it, then pulled it off. It pulls some of the red off.

-Seth

]

Im aware of that. I was explaining what I meant.

if that's just cleared, the contrast in the marbled portion is too much. It would look a hell of a lot better if it had a dark red candy over the whole thing.

wizkiddrummer wrote:

TheSundownFire (GME Chat) wrote:

fexican wrote:

TheSundownFire (GME Chat) wrote:Marbelizer?

if u ment what i used, plastic wrap.

No marbelizer is a paint additive. Its what JO3Y had in the Cav's paint IIRC.

He didn't use marbelizer. He sprayed black, sprayed red, layed plastic wrap down on it, then pulled it off. It pulls some of the red off.

-Seth

correction. sprayed red on sealer and sprayed black on plastic and applyed.
i did it my self thats why windows were left in.
no that was not clear.
pics will be up latter. keep in mind i know i have to touch up some spots but this is my first time paintin a whole car.


http://www.cardomain.com/ride/3364129

I like it so far.


Somthing tells me I'll see this car pretty soon........

z yaaaa wrote:why didnt they take the windows out?

My '97 was done with the windows in, you should really get over this and realize you're on a j-body site, not a restoration site for Barrett-Jackson bound collector and muscle cars.

did you remember to tape off the license plate this time?





Check out my build thread!

RuggedZ wrote:did you remember to tape off the license plate this time?

plate wasnt on cuz new bumper was. pics will be up in ~40 minutes


http://www.cardomain.com/ride/3364129

Looks like a bowling ball pattern. Waiting for finished pics..



http://www.cardomain.com/ride/709168#

Joe Schulte wrote:

z yaaaa wrote:why didnt they take the windows out?

My '97 was done with the windows in, you should really get over this and realize you're on a j-body site, not a restoration site for Barrett-Jackson bound collector and muscle cars.

my whole car was painted with all the glass in.

Ok. my camera sucks. the weather didnt wanna work with me. heres some crappy pics for now. It needs a wash. its not finished yet but its my only car but i have all weekend off to finish it =). still needs to wet sand top coat of clear/some runs=(. and some parts i @!#$ up when i taped need to be touched up with a detail and cleared. some light over spray on windows need to be razored (i did most prep but not all cuz i had grad rehersal that day and it was the one day it wasnt gonna be hummid as @!#$ that week and that was last week booth would be up)











http://www.cardomain.com/ride/3364129

damn your camera does suck, all the pics came out as red x's.





Check out my build thread!

Joe Schulte wrote:

z yaaaa wrote:why didnt they take the windows out?

My '97 was done with the windows in, you should really get over this and realize you're on a j-body site, not a restoration site for Barrett-Jackson bound collector and muscle cars.

X2

It's a cavalier with a quick, Learning process paint job Brad haha.

Ok. my camera sucks. the weather didnt wanna work with me. heres some crappy pics for now. It needs a wash. its not finished yet but its my only car but i have all weekend off to finish it =). still needs to wet sand top coat of clear/some runs=(. and some parts i @!#$ up when i taped need to be touched up with a detail and cleared. some light over spray on windows need to be razored (i did most prep but not all cuz i had grad rehersal that day and it was the one day it wasnt gonna be hummid as @!#$ that week and that was last week booth would be up)












http://www.cardomain.com/ride/3364129

RuggedZ wrote:damn your camera does suck, all the pics came out as red x's.

lol



Flickr Photostream Facebook Twitter