Side skirts for '02 Sunfire - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Side skirts for '02 Sunfire
Monday, March 13, 2006 11:48 AM
I have a 2002 Sunfire Se. I was just wondering if there were any different side skirts that have the same fitment pattern. I would just like to know if there is a more stylish side skirt that has the same screw pattern on it. Thanks.




Re: Side skirts for '02 Sunfire
Monday, March 13, 2006 12:02 PM
ls sport, SF gt


-Brandon

Re: Side skirts for '02 Sunfire
Monday, March 13, 2006 2:10 PM
do you have a coupe or a sedan, and fill out your registry, if you would have you would have already had the answer to your question by now.








http://www.j-body.org/forums/read.php?f=1&i=333805&t=333704#333805
Re: Side skirts for '02 Sunfire
Monday, March 13, 2006 6:13 PM
redecocav wrote:ls sport, SF gt


GT skirts would be way more trouble than it's worth. He's asking for something that attaches the same as his stock SE skirts. The GT ones do not.

He can use any stock j-body skirts EXCEPT the 95-02 GT skirts or 03-05 Sunfire skirts.

Other than those, they're all interchangable.





Re: Side skirts for '02 Sunfire
Monday, March 13, 2006 6:33 PM
Thanks Weasel...I'll take a look at some of those skirts and see if I like anything more than what I have now.



Re: Side skirts for '02 Sunfire
Monday, March 13, 2006 6:37 PM
^^^ if they have clips, all he has to do is just 3m tape the door panels and all


-Brandon

Re: Side skirts for '02 Sunfire
Tuesday, March 14, 2006 4:59 AM
The GT and 03+ Sunfire skirts don't use clips. They use plugs that push into holes in the side of the car. There really isn't a flat surface on the back side of them to put tape on. He'd have to drill the holes which is really more trouble than it's worth. If that was the route he was going, he'd be better off getting the RKSport Streetfire sides, since they've got flat surfaces for tape.

Again... he asked what installs the same as stock.





Re: Side skirts for '02 Sunfire
Tuesday, June 06, 2006 9:24 AM
here's a little twist with this post. i'm trying to put 02 skirts on my 99 cav. got the back underneath bolted on, but there's a gap between the outside of the skirt and the car. i tried glueing it to the car, but that didn't work to well. was thinking of drilling a recessed hole and bolting them on from the front, then covering the hole, sand and paint. but then that would really cause a problem if for some reason i had to take 'em off. is there a better way to go about this? or should i just say screw it and put Z skirts on.


Re: Side skirts for '02 Sunfire
Tuesday, June 06, 2006 10:41 AM
...umm better off getting the right skirts that will fit i think, i would personally say scratch it.


but for the original post, is urs a 4dr or 2dr? it doenst really matter but if its 4 ur not going to be able to put any (aftermarket ) 2door skits on witout custom fabrication. (but it all depands on the style) all i know is i boltd mine on the inside lip of the car and the front and rear wheel well



Re: Side skirts for '02 Sunfire
Tuesday, June 06, 2006 11:49 AM
Wild Weasel wrote:The GT and 03+ Sunfire skirts don't use clips. They use plugs that push into holes in the side of the car. There really isn't a flat surface on the back side of them to put tape on. He'd have to drill the holes which is really more trouble than it's worth. If that was the route he was going, he'd be better off getting the RKSport Streetfire sides, since they've got flat surfaces for tape.

Again... he asked what installs the same as stock.


thats the problem i'm having now. i picked up a set of 96z24 skirts for my 02z24. both skirts have plugs but the 96's don't match up with my holes. i tried using 3m tape but it didnt hold it for more than a few days so now i have to drill holes. should be fun.





GO PATS!!!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search