Huge thanks to Brian for saving me some $$$ over the Phantom Grip LSD insert... I bought his for $200 USD instead... took the getrag tranny (before the swap) and had it installed, cost me $250 (Canadian) but I also had the axle seals and the main seal replaced..
Now that the motor and clutch are broken it, I've started ripping on it... the wheels FINALLY spin together, handling in the corners is amazing, it powers thru them like mad... I love it!!
Definitely a worthwhile upgrade... thanks Brian
...j
<a href="http://www.lenkorules.com/"><img src="http://s93165229.onlinehome.us/images/zm/sig/LRDCsig3.jpg"></a>
How does the insert feel when it engages, does the car lurch or clunk as the lsd locks, or is it transparent. I have a friend with a locker in his jeep, and it lurches all over the place when driving in a parking lot, I just want to make sure that this feels more streetable.
where would I get the Team Green LSD??
me too. I want one.
<img src="http://img.photobucket.com/albums/v292/dragmyz24/shoppedcav2.jpg">
Rush Racing
http://www.gettherush.com/
wizzer03@hotmail.com
Email him and ask for one. O yea, they rock. I had one in the old car. Seen it in action on one of team green's cars. Killer traction.
O noes!
Thanks for the Review Lenko!!!!! and your welcome.
(you too Smokey)
Right now we are out of stock on them, waiting for the plates to get finished up, and a order of springs to come in. Once I have more here, and ready, I'll put the Classified add back up, and a link in my sig. (unless a Mod tells me otherwise...... Ron?)
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
oh yea..... I have a 3spd auto and a 4spd auto sitting here...... that I need to tear apart, and design one to fit them. It might be awhile yet before it gets done, but its on the 'to-do' list.
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
Sweeet, good news
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
very good news.....only works w/ the getrag? not the izuzu?
The one I bought only works with the 00+ getrag (5 speed).
After installing the GM supercharger... and taking it for a spin today.... HOLY CRAP!!!
Is this a worthwhile mod?? HELL YEAH!!!!!!
I have traction issues... need new tires
<a href="http://www.lenkorules.com/"><img src="http://s93165229.onlinehome.us/images/misc/redsig.jpg"></a>
So john.... would you recommend this for someone with umm... a supercharged 3800 V6 in their cavalier?
What about Quaife??? Noone likes those?? I just had mine done and both tires spin a little since the clutch is not broken in yet, so I chirpped the tires getting used to the flywheel.
Supercharged guy, get a Quaife take off your fenders and put a 26 inch SLICK on the Cavy, that is what I am gonna do, with my diff.
Naw I am going with 24.5. jk on the 26.
Best time:"""11.946""" @ 114.73 mph @17psi 1.83--60"
11 second daily driver!!!!
Race Related 727-561-9440
Shop of choice for your 11 second J body!
Also, built bottom end and or top end LSJ and L61's available.
13's
----12's
----11's
----10's
So this definatly dosnt work with the Isuzu or it just hasnt been tested yet ?
<a href="http://nystreetscene.com">http://nystreetscene.com</a>
rj wrote:So this definatly dosnt work with the Isuzu or it just hasnt been tested yet ?
It fits both the Isuzu and Getrag....... Lenko is the first to have our's in the Getrag trans. (that I know of at least) We've had 7+ of them in Isuzu trans's........
SunCavi_L61T3/T04E wrote:What about Quaife??? No one likes those?? I just had mine done and both tires spin a little since the clutch is not broken in yet, so I chirpped the tires getting used to the flywheel.
$200 vs. $1300........ you decide. Dont get me wrong, I'd love a Quaife....... but so many other things cost less at this point.
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
hey brian, put me down for one, i definitly want it. Im gonna need all the help i can get as far as traction goes.
let me know when they are available again
Hey Brian, Its Craig from the old days of JBR and sam's Rockford Meets. Are you going to design an LSD for the older Getrags? IE the HM282? Im pretty sure you would have a nice market if you came out with this part. I'd be willing to buy and test one out for ya.
<img src="http://boner.berettaspeed.com/cavysig.jpg">
Are you selling these in batches? I would defintaly love to have one but its going to be a phew weeks before I get the extra cash.
<a href="http://nystreetscene.com">http://nystreetscene.com</a>
Hey brian will the fit in the muncie/getrag that everyone is swapping? or just the new getrag and isuzu?
This months projects: Completion and Installation of Homemade Turbo System, Brakes, Fiberglass sparetire enlcosure and amp rack.
yes, selling them in batches. I'm trying to get 10 made up this time (last 2 batches been 4 units each)
not sure yet it if will fit, loki and Graig....... I have a '92 GTZ trans sitting here too...... it needs some work, so while I've got it apart, I'll see if I can get it to fit....... or design one to fit.
SPD RCR Z -
'02 Z24 420whp
SLO GOAT -
'04 GTO 305whp
W41 BOI -
'78 Buick Opel Isuzu W41 Swap
...oooh, please dont forget about me, brian. got the cash waiting for ya, lol.
...don't hate!.. respect people that have talent, even if it is in something you don't like or understand.
me want one for a 4 speed auto!!!
ill gladly wait for one
<a href="http://www.cobaltss.net/forums//index.php?referrerid=37" target="new"><img src="http://registry.gmenthusiast.com/images/tgmtzmx/SatchmoeSigJBO.jpg"border="0"></a>
